• Features
  • Specifications
  • Accessories
Features Benefits
Two 10GbE iSCSI host ports per controller
  1. Outstanding throughput, ideal for bandwidth-demanding applications
6th generation, ASIC667 architecture
  1. Boost performance up to 80% better than ASIC 400 models
  2. Advanced fault tolerance, ensuring data integrity even in multiple drive failure events

Green designs:

  1. 80 PLUS silver-certified power supplies
  2. Intelligent multi-level drive spin-down technology
  1. Power supplies delivering more than 85% of energy conversion efficiency
  2. In spin-down state, drives can save up to 60% of energy consumption
CacheSafe technology Backup battery automatically supplies power to write cached data into flash module for permanent protection during power outage
Fault-tolerant hardware modules Redundant controllers, PSUs, fans; high-availability hardware design, eliminating single point of failure
Drive interface: SAS disk drives Allow data of different values to be stored in different storage tiers, enabling the best ROI
Maximum expansion of 6 JBODs via multi-lane SAS links, up to 112 HDDs in total "Pay as you grow" scalability; no waste on what you don't need, and no worries about what you will need
Powerful management suite, SANWatch, support, including multi-pathing functions
  1. Easy management and monitoring of your subsystems anywhere, locally or remotely
  2. Recognize and manage redundant paths; support path failover and load-balancing
Multiple monitoring methods Real-time problem detection and notification to achieve continuous operation
Intelligent firmware functions Protect against hardware failure; ensure data integrity and optimized performance
Host Interface
  1. Two (2) 10GbE iSCSI ports (SFP+) on each controller
  2. Concurrent I/O commands
  3. Maximum tagged command queuing: 1024
Drive Interface
  1. Sixteen (16) 3Gbps SAS, hot-swappable drive trays
  2. Accommodates 1-inch pitch, 3.5-inch SAS disk drives
  3. S.M.A.R.T. support
  4. NCQ support
  5. Automatic bad-sector reassignment
  6. Dedicated bandwidth to each connected drive
  7. Drive buffer on/off switch
Controller Dual redundant 
Form Factor 3U Rack-mount
RAID functionality
  1. Global, Dedicated or Enclosure hot-spare
  2. RAID levels supported: RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60
  3. Online expansion by:
    1. Adding new drives
    2. Copying and replacing drives with drives of larger capacity
  4. RAID migration
  5. Configurable stripe size and write policy per array
  6. Intelligent drive handling:
    1. In degraded mode: skips irreparable blocks to continue rebuild
    2. In normal operation: data-block verification and repair
Management
  1. Java-based SANWatch management software with multi-pathing support (EonPath)
  2. COM1 serial port for local access to firmware-embedded utility
  3. Automated cache flush and caching mode operation per enclosure status
  4. GUI, Telnet, and SSH system monitoring via Ethernet
  5. Platform-independent firmware manager
  6. Various event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, and MSN
  7. LCD keypad panel for monitoring and access to all configuration options
  8. Module status LED indicators:
    1. Component presence detection & thermal sensors via I2C bus
Green Designs
  1. Power supplies delivering high energy efficiency
  2. Dynamic cooling mechanism
  3. Intelligent multi-level drive spin-down
System Components
  1. Two (2) redundant RAID controller modules
  2. Two(2) 1GB DIMM modules, each module upgradable to 4GB
  3. Two(2) redundant 530W power supply units
  4. Two (2) redundant cooling modules
  5. Sixteen (16) hot-swappable drive trays with MUX kits
  6. Two (2) pre-installed Cache Backup Modules (CBM), each including one Li-Ion battery backup unit (BBU) and one Flash Backup Module (FBM)
Dimensions(without chassis ears/protrusions) 445mm (W) x 130mm (H) x 497mm (D)
Weight
  1. Net weight:19.66 kg
  2. Gross weight: 39.75kg

Spare Parts

Cache backup module IFT-9373CCBM Cashe backup module, Li-lon, Flash, for EonStor G6 series subsystems, BBU ID
RAID controller module for ES S16E-R1240 IFT-83SE12RF16MA RAID controller module, for ES S16E-R1240 subsystem, SAS Exp., 1GB DDR-II RAM, CBM
RAID controller module for ES S16E-G1240 IFT-83SE12GF16MA RAID controller module, for ES S16E-G1240 subsystem, SAS Exp., 1GB DDR-II RAM
HDD dongle board IFT-9273S1N2S1S MUX board, 3.5" HDD, exclusive for SAS 3G drive side dual-controller subsystems, 5V only, Rev. 1.2
Left-side forearm handle for EonStor 3U IFT-9273CHandLLCD Left-side forearm handle, for ES Enhanced 3U-16bay subsystems, LCD panel included
Right-side forearm handle for EonStor 3U IFT-9270CHandR Right-side forearm handel,for ES 3U/16-bay subsystems,applicable to the left or Right-side of JBOD subsystems
IFT-9373AYCAB DB-9 Y-cable for dual-controller subsystems; maintenance-free during controller failover/failback
Power supply unit for EonStor G6 IFT-9373CPSU Power supply unit for EonStor G6 2UR/12-bay and 3U/16-bay subsystems, 530W capacity
IFT-9373CSlider36 Slide rail assembly, for all EonStor G6 subsystems, 24"~36" rack depth
9273CDTray IFT-9373CDTray 3.5" Hard disk drive tray
9273S1DT2S1S IFT-9373S1DT2S1S 3.5" Hard disk drive tray w/MUX board, exclusively for dual-controller subsystems v1.2

Accessories

IFT-9373CBBU Battery backup unit, Li-Ion, for EonStor G6 series subsystems, BBU ID
IFT-9373CCBM Cashe backup module, Li-lon, Flash, for EonStor G6 series subsystems, BBU ID
RAID controller module IFT-83SE12RF16MB RAID controller module, for ES S16E-R1240 subsystem, SAS Exp., 2GB DDR-II RAM, CBM
RAID controller module IFT-83SE12RF16MC RAID controller module, for ES S16E-R1240 subsystem, SAS Exp., 4GB DDR-II RAM, CBM
RAID controller module IFT-83SE12GF16MB RAID controller module, for ES S16E-G1240 subsystem, SAS Exp., 2GB DDR-II RAM
RAID controller module IFT-83SE12GF16MC RAID controller module, for ES S16E-G1240 subsystem, SAS Exp., 4GB DDR-II RAM
IFT-9373CPSU Power supply unit for EonStor G6 2UR/12-bay and 3U/16-bay subsystems, 530W capacity
IFT-9373ASCAB RS-232C cable, DB9 to DB9

IFT-9270CFCCab01

 Optical FC cable, LC-LC, MM-62.5/125, Duplex, LSZH, O.D.=1.8mm*2, 1 Meter

IFT-9270CFCCab02

Optical FC cable, LC-LC, MM-62.5/125, Duplex, LSZH, O.D.=1.8mmx2, 5 Meters

IFT-9270CFCCab03

Optical FC cable, LC-LC, MM-62.5/125, Duplex, LSZH, O.D.=1.8mmx2, 10 Meters
IFT-9270CMSASCAB3 SAS external cable, SFF-8470 to SFF-8088, 50 Centimeters
IFT-9270CMSASCAB4 SAS external cable, SFF-8470 to SFF-8088, 120 Centimeters
IFT-9270CMSASCAB5 SAS external cable, SFF-8470 to SFF-8088, 170 Centimeters
IFT-9370CSFP10G 10GBASE-SR SFP+ Transceiver, LC, multi-mode